Oct 15, 20262 min read

How a missing gas led to the discovery of Teflon

In 1938, Roy Joseph Plunkett and Jack Rebok found white powder inside a cylinder that had been set up for a TFE experiment.

Listen instead
How a missing gas led to the discovery of Teflon
0:00 / 1:05

A cylinder with no pressure

Teflon began in a cylinder with no pressure but white powder inside. On April 6, 1938, American chemist Roy Joseph Plunkett was working at Kinetic Chemicals with gases related to refrigerants. That morning, he asked his research assistant, Jack Rebok, to set up their experimental apparatus with a cylinder of TFE, or tetrafluoroethylene.

The cylinder was supposed to contain gas for their experiment. It was prepared as part of the apparatus Plunkett and Rebok were setting up, with TFE inside. But when they checked the cylinder, the pressure was gone. The gas they expected to find was not under pressure in the container as they had anticipated.

The powder inside

At first, the missing pressure made the test look like a failure. The cylinder seemed empty, and the experiment appeared to be finished. Anything that might still be inside could have been contamination. If that was the case, it could make the test useless.

Rather than throwing the cylinder away, Plunkett and Rebok cut it open. Inside, they found white powder clinging to the cylinder's interior. The container that had seemed empty still held something, though not the gas they expected. Plunkett had to determine whether the powder belonged there or was contamination that would make the test useless.

From TFE to a solid polymer

The powder felt slippery and could take extreme heat. It also resisted chemicals. The material was not simply an unwanted substance in the cylinder: TFE had joined into a solid polymer called polytetrafluoroethylene, or PTFE.

That result gave the white powder a clear identity. The cylinder had contained TFE for the experiment, but the TFE had joined into a solid polymer inside it. What had first looked like an empty container after the pressure was gone held a new solid instead.

The name Teflon

That material became Teflon, marketed under that name starting in 1945. The cylinder still held its contents as a new solid. What began with a pressureless cylinder and white powder inside led Plunkett and Rebok to the material that became Teflon.

Share

Get new stories in your inbox

You'll get an email when a new story arrives. No schedule, no spam, just the next tale.

We'll send one email to confirm it's you.

Keep going

More like this